CCNP Service Provider

CCNP Service Provider
هدف از ارایه این دوره آمادگی افراد جهت آشنایی کامل با پروتکل های OSPF v2 ، OSPF v3 ، IS-IS ، BGP و PBR MPLS و تمامی Feature های مبتنی بر MPLS ، Layer 2 VPN ، Layer 3 VPN و IPV6 و تمامی سرویس ها و پروتکل های مبتی بر Platform های IOS / IOS XE / IOS XR و سایر Feature های مدیریت ترافیک و HA می باشد.
کارشناسان و مدیران فنی Data Center ها ، Enterpriser Network و Service Provider
  • CCNP Service Provider Composite : CCNA R&S
  • SPROUTRE : CCNA SP
  • SPADVROUTE : SPROUTRE
  • SPCORE : SPADVROUTE
  • SPEDGE : SPCORE
  • ۱٫۰ OSPFv2 and OSPFv3 Routing in Service Provider Environments
  • ۱٫۱ Describe multi-area OSPFv2 and OSPFv3 operations
  • ۱٫۲ Implement multi-area OSPFv2 and OSPFv3 on IOS-XR and IOS-XE
  • ۱٫۳ Implement different OSPF areas (stubby, totally stubby, NSSA) on IOS-XR and IOS-XE
  • ۱٫۴ Implement OSPF neighbor authentication on IOS-XR and IOS-XE
  • ۱٫۵ Troubleshoot OSPF IOS-XR and IOS-XE configuration errors
  • ۲٫۰ IS-IS, IPv4, and IPv6 in Service Provider Environments
  • ۲٫۱ Describe multi-area IS-IS operations
  • ۲٫۲ Implement multi-area IS-IS for IPv4 and IPv6 on IOS-XR and IOS-XE
  • ۲٫۳ Implement IS-IS neighbor authentication on IOS-XR and IOS-XE
  • ۲٫۴ Troubleshoot IS-IS IOS-XR and IOS-XE configuration errors
  • ۳٫۰ BGP Routing in Service Provider Environments
  • ۳٫۱ Describe the Internet routing hierarchy: Network Service Providers (NSP), Network Access Point (NAP), ISP Tiers (Tier 1, 2 and 3)
  • ۳٫۲ Describe connectivity between an enterprise network and an SP that requires the use of BGP
  • ۳٫۳ Describe connectivity between a SP and upstream SPs
  • ۳٫۴ Describe BGP transit AS operations
  • ۳٫۵ Implement EBGP and IBGP on IOS-XR and IOS-XE
  • ۳٫۶ Implement BGP neighbor authentication on IOS-XR and IOS-XE
  • ۳٫۷ Optimize BGP IOS-XR configurations using af-groups, session-groups, and neighbor-groups
  • ۳٫۸ Optimize BGP IOS-XE configurations using peer-groups
  • ۳٫۹ Influence BGP route selection by using various BGP attributes on IOS-XR and IOS-XE
  • ۳٫۱۰ Troubleshoot BGP IOS-XR and IOS-XE configuration errors
  • ۴٫۰ Route Manipulations in Service Provider Environments
  • ۴٫۱ Implement Routing Policy Language (RPL) to configure a desired routing policy on IOS-XR
  • ۴٫۲ Implement Route-Maps to configure a desired routing policy on IOS-XE
  • ۴٫۳ Implement route filterings using prefix-list, distribute-list, and as-path list on IOS-XE
  • ۴٫۴ Implement route redistributions on IOS-XR and IOS-XE
  • ۵٫۰ High Availability Routing Features
  • ۵٫۱ Implement NSF/NSR/Graceful Restart for OSPF on IOS-XR and IOS-XE
  • ۵٫۲ Implement NSF/NSR/Graceful Restart for IS-IS on IOS-XR and IOS-XE
  • ۵٫۳ Implement Bidirectional Forwarding Detection (BFD) for OSPF on IOS-XR and IOS-XE
  • ۵٫۴ Implement Bidirectional Forwarding Detection (BFD) for IS-IS on IOS-XR and IOS-XE
  • ۱٫۰ BGP Routing Features in a Service Provider IP NGN Env
  • ۱٫۱ Describe the BGP routing processes in IOS-XR
  • ۱٫۲ Configure the BGP timers on IOS-XR and IOS-XE
  • ۱٫۳ Describe the need for BGP confederations in BGP transit backbones
  • ۱٫۴ Design and implement BGP route reflectors to scale IBGP in BGP transit backbones on IOS-XR and IOS-XE
  • ۱٫۵ Implement BGP in SP IP NGN IOS-XR and IOS-XE PE routers to support multi-homed BGP Customers
  • ۱٫۶ Implement Remote Triggered Blackhole Filtering (RTBF) on IOS-XR and IOS-XE
  • ۱٫۷ Implement BGP TTL security on IOS-XR and IOS-XE
  • ۱٫۸ Implement BGP maximum-prefix on IOS-XR and IOS-XE
  • ۱٫۹ Implement BGP route dampening on IOS-XR and IOS-XE
  • ۱٫۱۰ Troubleshoot BGP IOS-XR and IOS-XE configuration errors in service provider environments
  • ۱٫۱۱ Optimize BGP IOS-XR configurations using af-groups, session-groups, and neighbor-groups
  • ۱٫۱۲ Optimize BGP IOS-XE configurations using peer-groups
  • ۲٫۰ Multicast Routing in a Service Provider IP NGN Environ
  • ۲٫۱ Describe Multicast Concepts (multicast distribution trees, multicast routing protocols and IGMP operations)
  • ۲٫۲ Describe Any-source multicast (ASM) versus Source Specific Multicast (SSM)
  • ۲٫۳ Describe Intra Domain versus Inter Domain Multicast Routing
  • ۲٫۴ Describe the mapping of multicast IP addresses to MAC addresses
  • ۲٫۵ Describe and illustrate how RPF check can fail if the unicast and multicast topologies are non-congruent
  • ۲٫۶ Describe multiprotocol BGP functions in mroute distribution
  • ۲٫۷ Describe the principles and operations of PIM-SM
  • ۲٫۸ Describe multicast source discovery protocol (MSDP) operations
  • ۲٫۹ Describe methods used to secure multicast
  • ۲٫۱۰ Implement PIM-SM operations on IOS-XR and IOS-XE
  • ۲٫۱۱ Implement Auto-RP, PIMv2 BSR, Anycast RP on IOS-XR and IOS-XE
  • ۲٫۱۲ Implement Bi-Dir PIM operations in SP IP NGN environment on IOS-XR and IOS-XE
  • ۲٫۱۳ Implement SSM operations on IOS-XR and IOS-XE
  • ۲٫۱۴ Implement MSDP operations on IOS-XR and IOS-XE
  • ۲٫۱۵ Troubleshoot multicast routing IOS-XR and IOS-XE configurations errors in service provider environments
  • ۳٫۰ IPv6 in a Service Provider IP NGN Environment
  • ۳٫۱ Describe DNS and DHCP operation in IPv6
  • ۳٫۲ Describe the fields that are used in the IPv6 header to support QoS functions
  • ۳٫۳ Describe Cisco IOS/IOS-XE and IOS-XR IPv6 network management and troubleshooting tools like traceroute/ping
  • ۳٫۴ Describe dual-stack implementations
  • ۳٫۵ Describe IPv6 tunneling mechanisms
  • ۳٫۶ Configure IPv6 multicast routing
  • ۳٫۷ Configure static IPv6-in-IPv4 tunnels on IOS-XR and IOS-XE
  • ۳٫۸ Configure dynamic 6to4 tunnels on IOS-XR and IOS-XE
  • ۴٫۰ High Availability Routing Features
  • ۴٫۱ Implement NSF/NSR/Graceful Restart for BGP on IOS-XR and IOS-XE
  • ۴٫۲ Implement Bidirectional Forwarding Detection (BFD) for BGP on IOS-XR and IOS-XE
  • ۴٫۳ Implement high availability and optimization multicast routing features on IOS-XR and IOS-XE
  • ۱٫۰ QOS in a Service Provider IP NGN Environment
  • ۱٫۱ Describe the DiffServ and IntServ QoS models
  • ۱٫۲ Describe the QoS mechanisms (classification and marking, congestion management and avoidance, traffic policing and shaping)
  • ۱٫۳ Describe IPv6 Flow Label
  • ۱٫۴ Describe trust boundaries in enterprise and SP environments
  • ۱٫۵ Describe Cisco MQC for QoS configurations
  • ۱٫۶ Describe hierarchical QoS configurations
  • ۱٫۷ Describe the Cisco NBAR feature for discovering network protocols and for packets classifications
  • ۱٫۸ Describe the typical Edge PE routers and Core P routers QoS requirements
  • ۱٫۹ Implement classification and marking in an inter-domain network using QPPB on Cisco IOS-XR and IOS-XE
  • ۱٫۱۰ Implement class-based markings on Cisco IOS-XR and IOS-XE
  • ۱٫۱۱ Implement QoS pre-classify on tunnel interface on Cisco IOS-XR and IOS-XE
  • ۱٫۱۲ Implement CB-WFQ on Cisco IOS-XR and IOS-XE
  • ۱٫۱۳ Implement LLQ on Cisco IOS-XR and IOS-XE
  • ۱٫۱۴ Implement WRED on Cisco IOS-XR and IOS-XE
  • ۱٫۱۵ Implement traffic policing on Cisco IOS-XR and IOS-XE
  • ۱٫۱۶ Implement traffic shaping on Cisco IOS-XR and IOS-XE
  • ۱٫۱۷ Describe LPTS and hardware rate limiters on Cisco IOS-XR routers
  • ۱٫۱۸ Describe MPLS EXP bits
  • ۱٫۱۹ Describe MPLS QoS implementation concepts and models
  • ۱٫۲۰ Implement MPLS DiffServ tunneling on Cisco IOS-XR and IOS-XE
  • ۱٫۲۱ Troubleshoot QoS IOS-XR and IOS-XE configuration errors
  • ۲٫۰ MPLS/LDP in a Service Provider IP NGN Environment
  • ۲٫۱ Describe the CEF, FIB, LFIB and LIB tables on Cisco routers
  • ۲٫۲ Describe MPLS labels and label stack operations on Cisco routers
  • ۲٫۳ Describe LDP operations in Cisco routers
  • ۲٫۴ Describe MPLS OAM (MPLS LSP ping and MPLS traceroute)
  • ۲٫۵ Describe MPLS applications in service provider environment
  • ۲٫۶ Implement LDP on Cisco IOS-XR and IOS-XE
  • ۲٫۷ Implement LDP high availability features on Cisco IOS-XR and IOS-XE
  • ۲٫۸ Troubleshoot LDP on IOS-XR and IOS-XE configuration errors
  • ۳٫۰ MPLS/LDP in a Service Provider IP NGN Environment
  • ۳٫۱ Describe MPLS traffic engineering (TE) concepts
  • ۳٫۲ Describe MPLS TE constraint-based path computations
  • ۳٫۳ Describe the details of MPLS TE tunnels, including path setup procedures and path maintenance
  • ۳٫۴ Describe methods of assigning traffic into MPLS TE tunnels
  • ۳٫۵ Implement MPLS TE tunnels on Cisco IOS-XR and IOS-XE
  • ۳٫۶ Implement MPLS TE bandwidth control on Cisco IOS-XR and IOS-XE
  • ۳٫۷ Implement MPLS TE link and node protections on Cisco IOS-XR and IOS-XE
  • ۴٫۰ Transport Technologies
  • ۴٫۱ Describe the SP core transition from ATM/SONET/SDH based backbone to packet based IP/MPLS backbone
  • ۴٫۲ Implement 10/40/100 Gigabit Ethernet Interfaces on Cisco IOS-XR routers
  • ۴٫۳ Describe DWDM, IPoDWDM and ROADM
  • ۴٫۴ Implement IPoDWDM controller/interface on Cisco IOS-XR routers
  • ۱٫۰ VPN in Service Provider IP NGN Environments
  • ۱٫۱ Describe VPN implementation models (overlay, peer-to-peer)
  • ۱٫۲ Describe VPN technologies (L2TPv3, GRE, IPsec VPN, SSLVPN, DMVPN, GETVPN)
  • ۱٫۳ Describe L2 vs L3 VPNs
  • ۲٫۰ MPLS layer 3 VPNs in Service Provider IP NGN Environments
  • ۲٫۱ Describe MPLS L3 VPN architecture and operations (RDs, RTs, VRFs, MP-BGP, PE-CE routing)
  • ۲٫۲ Describe the design models for combining Internet access with MPLS L3 VPN services
  • ۲٫۳ Describe the various methods used to deploy IPv6 over MPLS (6PE and 6VPE)
  • ۲٫۴ Implement MP-BGP between PE routers on IOS-XR and IOS-XE
  • ۲٫۵ Implement PE-CE routings (static, EIGRP, OSPF, BGP) on IOS-XR and IOS-XE
  • ۲٫۶ Implement complex MPLS layer 3 VPNs on IOS-XR and IOS-XE
  • ۲٫۷ Implement carrier supporting carrier (CSC) on IOS-XR and IOS-XE
  • ۲٫۸ Troubleshoot MPLS L3 VPNs IOS-XR and IOS-XE configuration errors in service provider environments
  • ۳٫۰ Layer 2 VPNs in Service Provider IP NGN Environments
  • ۳٫۱ Describe L2TPv3 VPNs over an IP core network
  • ۳٫۲ Describe L2 VPNs (AToM and VPLS) over an IP/MPLS core network
  • ۳٫۳ Describe AToM Interworking , Implement AToM on IOS-XR and IOS-XE
  • ۴٫۰ Carrier Ethernet in Service Provider IP NGN Environments
  • ۴٫۱ Describe Carrier Ethernet forums and standards (MEF, IEEE, IETF)
  • ۴٫۲ Describe the concepts of User PE (U-PE) and Network PE (N-PE)
  • ۴٫۳ Describe E-Line versus E-LAN versus E-Tree
  • ۴٫۴ Describe QinQ tunneling
  • ۴٫۵ Describe Provider Backbone Bridge (PBB – aka MAC-in-MAC)
  • ۴٫۶ Describe VPWS versus VPLS
  • ۴٫۷ Describe VPLS versus H-VPLS
  • ۴٫۸ Describe VPLS signaling using LDP or BGP
  • ۴٫۹ Implement QinQ on Cisco ME 3400 Series Switches
  • ۴٫۱۰ Implement VPLS on IOS-XR and IOS-XE

نوشتن دیدگاه

نشانی ایمیل شما منتشر نخواهد شد.